- Home
- Cabinet Hinges & Plates
- CLIP/CLIP top Plates
Cabinet Hinges & Plates

Blum Cam Plate - Wood Screw - 0mm - 173H7100
$0.62
- Steel, nickel plated - Attached with wood screws #6 x 5/8" - Cam height adjustable +/- 2mm - Add additional wood screw if used with wide angled hinges - Hinge & Plate sold separately

Blum Two Piece Wing Plate - Wood Screw - 0mm - 175H7100
$0.94
- Zinc die-cast, nickel plated - Attached with wood screws #6 x 5/8" - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Inset Face Frame Cam Plate - Screw-in - 9mm - 175H5030.21
$1.94
NOTE: PLEASE MAKE SURE TO ORDER THE CORRECT HALF-CRANKED HINGE WHEN ORDERING THIS PLATE. THE FULL-CRANKED (INSET) HINGE IS NOT USED WITH THIS PLATE - Use with half-cranked (Half Overlay) hinges only - Zinc die-cast, nickel plated - Attached with truss head screws #8 x 3/4" - Can be used on frames with applied bead molding - Cam height adjustment...

Blum Face Frame Cam Center Mount Plate - Screw-in - 0mm - 175H6000
$0.90
- Steel, zinc die-cast and nickel plated - Center mount 9.5 (3/8") - Use of the PlateMate recommended - HINGE & PLATE SOLD SEPARATELY

Blum Face Frame Adapter Off-Center Mount Plate - Screw-in - 0mm - 175L6600.22
$0.63
- Zinc die-cast, nickel plated - Attached with #7 x 3/4" wood screws - Off-Center mount 12.5 (1/2") - Height adjustment +/- 2mm - Use of the PlateMate recommended - Hinge & Plate sold separately

Blum Face Frame Cam Center Mount Plate - Screw-in - 3mm - 175H6030
$1.01
- Steel, zinc die-cast and nickel plated - Center mount 9.5 (3/8") - Use of the PlateMate recommended - Hinge & Plate sold separately - #6 x 5/8 screws sold separately

Blum Face Frame Adapter Center Mount Plate - Screw-in - 3mm - 175L6030.21
$0.69
- Zinc die-cast, nickel plated - Attached with #7 x 3/4" wood screws - Center mount 9 (3/8") - Use of the PlateMate recommended - HINGE & PLATE SOLD SEPARATELY - #7 x 5/8 screws sold separately

Blum Two Piece Wing Plate - Wood Screw - 9mm - 175H7190
$1.45
- Zinc die-cast, nickel plated - Attached with wood screws #6 x 5/8" - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum EXPANDO Cam Wing Plate - 0mm - 174H7100E
$0.67
- Steel, nickel plated - Attached with pre-mounted screws with EXPANDO dowels - Cam height adjustable +/- 2mm - Add additional wood screw if used with wide angled hinges - HINGE & PLATE SOLD SEPARATELY

Blum Standard One-Piece Wing Mounting Plate - System Screw - 0mm - 173L8100
$0.37
- Steel, nickel plated - Attached with pre-mounted 5mm system screws - Height adjustment +/- 3mm - HINGE & PLATE SOLD SEPARATELY

Blum Cam Plate - Wood Screw - 3mm - 173H7130
$0.68
'- Steel, nickel plated - Attached with wood screws #6 x 5/8" - Cam height adjustable +/- 2mm - Add additional wood screw if used with wide angled hinges - Hinge & Plate sold separately

Blum Cam Adjustable In-Line Mounting Plate - Wood Screw - 0mm - 175H3100
$0.68
- Steel, nickel-plated - Attached with #6 x 5/8" wood screws (included) - Cam height adjustment +/- 2mm - Use of mounting plate template recommended Item number: 175H3100Sold: Each

Blum Cam Plate - System Screw - 0mm - 173H9100
$0.49
- Steel, nickel plated - Attached with system screws - Cam height adjustable +/- 2mm - Add additional wood screw if used with wide angled hinges - HINGE & PLATE SOLD SEPARATELY

Blum Two Piece Wing Plate - Wood Screw - 3mm - 175H7130
$1.08
- Zinc die-cast, nickel plated - Attached with wood screws #6 x 5/8" - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Cam Adjustable Wing Mounting Plate - 19mm - 173H9100.12
$2.02
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 3/4" recess on an inset application - Physical height: 1-1/16" (27mm) - 19 plate height (H) - Part no.: 173H9100.12

Blum Face Frame Adapter Off-Center Mount Plate - Screw-in - 3mm - 175L6630.22
$0.68
- Zinc die-cast, nickel plated - Attached with #7 x 3/4" wood screws - Off-Center mount 12.5 (1/2") - Height adjustment +/- 2mm - Use of the PlateMate recommended - Hinge & Plate sold separately

Blum Two Piece Wing Plate - System Screw - 18mm - 175H9190.22
$2.10
- Zinc die-cast, nickel plated - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Two Piece Wing Plate - System Screw - 0mm - 175H9100
$0.95
- Zinc die-cast, nickel plated - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Standard One-Piece Wing Mounting Plate - Wood Screw - 0mm - 173L6100
$0.32
- Steel, nickel plated - Attached with #6 x 5/8" wood screw - Height adjustment +/- 3mm - HINGE & PLATE SOLD SEPARATELY

Blum Cam Adjustable Wing Mounting Plate - 9mm - 173H9130.06
$1.81
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 3/8" recess on an inset or overlay application - Physical height: 11/16" (17mm) - 9 plate height (H) - Part no.: 173H9130.06

Blum Two Piece Wing Plate - System Screw - 6mm - 175H9160
$1.34
- Zinc die-cast, nickel plated - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Cam Adjustable Wing Mounting Plate - 6mm - 173H9100.04
$1.81
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 1/4" recess on an inset or overlay application - Physical height: 9/16" (14mm) - 6 plate height (H) - Part no.: 173H9100.04

Blum INSERTA Cam Plate - 0mm - 174H7100I
$1.24
- Steel (closing lever - zinc die-cast, nickel-plated) - Tool-free assembly with INSERTA self-anchoring feature - Cam height adjustment +/- 2mmBlum item number: 174H7100I

Blum One Piece Wing Plate - System Screw - 0mm - 175L8100
$0.85
- Zinc die-cast, nickel plated - Attached with pre-mounted system screws, 5mm - Height adjustment +/- 3mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Cam Adjustable Wing Mounting Plate - 13mm - 173H9100.08
$1.92
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 1/2" recess on an inset application - Physical height: 13/16" (21mm) - 13 plate height (H) - Part no.: 173H9100.08

Blum Face Frame Adapter Off-Center Mount Plate - Screw-in - 6mm - 175L6660.22
$0.88
- Zinc die-cast, nickel plated - Attached with #7 x 3/4" wood screws - Off-Center mount 12.5 (1/2") - Height adjustment +/- 2mm - Use of the PlateMate recommended - Hinge & Plate sold separately - #7 x 5/8 screws sold separately

Blum Two Piece Wing Plate - System Screw - 9mm - 175H9190
$1.44
- Zinc die-cast, nickel plated - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum Cam Plate - System Screw - 3mm - 173H9130
$0.69
'- Steel, nickel plated - Attached with system screws - Cam height adjustable +/- 2mm - Add additional wood screw if used with wide angled hinges - HINGE & PLATE SOLD SEPARATELY

Blum Cam Adjustable Wing Mounting Plate - 29mm - 173H9130.18
$2.12
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 1-1/8" recess on an inset application - Physical height: 1-7/16" (37mm) - 29 plate height (H) - Part no.: 173H9130.18

Blum Cam Adjustable In-Line Mounting Plate - EXPANDO - 0mm - 177H3100E
$0.82
- Steel, nickel-plated - Attached with pre-mounted screws with EXPANDO dowels - Cam height adjustment +/- 2mm - Use of mounting plate template recommended Blum item number: 177H3100ESold: Each

Blum Cam Adjustable Wing Mounting Plate - 25mm - 173H9100.16
$2.12
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 1" recess on an inset application - Physical height: 1-5/16" (34mm) - 25 plate height (H) - Part no.: 173H9100.16

Blum Face Frame Cam Center Mount Plate - Screw-in - 6mm - 175H6060
$1.18
- Steel, zinc die-cast and nickel plated - Center mount 9.5 (3/8") - Use of the PlateMate recommended - Hinge & Plate sold separately - #6 x 5/8 screws sold separately

Blum One Piece Wing Plate - System Screw - 9mm - 175L8190
$1.38
- Zinc die-cast, nickel plated - Attached with pre-mounted system screws, 5mm - Height adjustment +/- 3mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately- Note: 175L8100 pictured

Blum Cam Adjustable Wing Mounting Plate - 22mm - 173H9130.14
$2.02
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 7/8" recess on an inset application - Physical height: 1-1/4" (31mm) - 22 plate height (H) - Part no.: 173H9130.14

Blum Cam Adjustable Wing Mounting Plate - 16mm - 173H9130.10
$1.92
- Mounting plate with cam height adjustment - Steel, nickel-plated with zinc adapter - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Cam height adjustment +/- 2mm - For 5/8" recess on an inset application - Physical height: 15/16" (24mm) - 16 plate height (H) - Part no.: 173H9130.10

Blum EXPANDO Cam Wing Plate - 3mm - 174H7130E
$0.77
- Steel, nickel plated - Attached with pre-mounted screws with EXPANDO dowels - Cam height adjustable +/- 2mm - Add additional wood screw if used with wide angled hinges - HINGE & PLATE SOLD SEPARATELY

Blum EXPANDO Cam Wing Plate - 0mm - Black Onyx - 174H7100E.ONYX
$0.76
- Steel, nickel plated - Attached with pre-mounted screws with EXPANDO dowels (618.1500) - Cam height adjustable +/- 2mm - HINGE & PLATE SOLD SEPARATELY - Color: Black Onyx

Blum Two Piece Wing Plate - System Screw - 3mm - 175H9130
$1.09
- Zinc die-cast, nickel plated - Attached with #7 x 5/8" wood screws or 5mm x 13mm system screws - Height adjustment +/- 2mm - Add additional wood screw if used with wide angle hinges - Hinge & Plate sold separately

Blum INSERTA Cam Plate - 3mm - 174H7130I
$1.41
- Steel (closing lever - zinc die-cast, nickel-plated) - Tool-free assembly with INSERTA self-anchoring feature - Cam height adjustment +/- 2mmBlum item number: 174H7130I

Blum Standard One-Piece Wing Mounting Plate - Wood Screw - 3mm - 173L6130
$0.37
'- Steel, nickel plated - Attached with #6 x 5/8" wood screw - Height adjustment +/- 3mm - HINGE & PLATE SOLD SEPARATELY

Blum Face Frame Cam Center Mount Plate - Screw-in - 4.5mm - 175H6040
$1.10
- Steel, zinc die-cast and nickel plated - Center mount 9.5 (3/8") - Use of the PlateMate recommended - Hinge & Plate sold separately

Blum EXPANDO (twin application) Cam Plate - 0mm - 174H710ZE
$0.65
- Steel, nickel plated - Attached with pre-mounted screws with EXPANDO dowels for twin application (618.1500) - Cam height adjustable +/- 2mm

Blum Standard One-Piece Wing Mounting Plate - System Screw - 3mm - 173L8130
$0.42
- Steel, nickel plated - Attached with pre-mounted 5mm system screws - Height adjustment +/- 3mm - HINGE & PLATE SOLD SEPARATELY

Blum Face Frame Adapter Plate with Flange - 0mm - 175L6600.24
$1.20
- Recommended when using the 170° and zero protrusion hinges on face frame cabinets- Zinc die-cast, nickel plated- Attached with #7 x 3/4" wood screws- Off-center mount 12.5 (1/2")- Height adjustment +/- 2mm- Use of the PlateMate recommended- HINGE & PLATE SOLD SEPARATELYBlum Item Number: 175L6600.24

Blum 173H7100 CLIP Cam Adjustable In-Line Mounting Plate - Wood Screw - 0mm - Black Onyx - 175H3100-ONYX
$0.77
- Steel, nickel-plated - Attached with #6 x 5/8" wood screws (included) - Cam height adjustment +/- 2mm - Use of mounting plate template recommended Item number: 175H3100-ONYX- Finish: Black Onyx- Sold: Each

Blum Cam Adjustable In-Line Mounting Plate - Wood Screw - 0mm - 175H5400
$0.00
DISCOUNTINUED - PLEASE ORDER REPLACEMENT ITEM 175H3100 - Zinc die-cast, nickel-plated - Attached with #6 x 5/8" wood screws - Cam height adjustment +/- 2mm - Use of mounting plate template recommended - HINGE & PLATE SOLD SEPARATELY

Blum Face Frame Cam Off-Center Mount Plate - Screw-in - 0mm - 175H6600
$0.00
DISCONTINUED AND NO LONGER AVAILABLE. CONSIDER THE 175H6000 - Steel, zinc die-cast and nickel plated- Attached with #7 x 3/4" wood screws- For use with INSERTA hinge cups- Off-Center mount 12.5 (1/2")- Cam height adjustment +/- 2mm- Use of the PlateMate recommended- Hinge & Plate sold separately- #7 x 5/8 screws sold separately

Blum Cam Adjustable In-Line Mounting Plate - EXPANDO - 3mm - 177H3130E
$0.94
- Steel, nickel-plated - Attached with pre-mounted screws with EXPANDO dowels - Cam height adjustment +/- 2mm - Use of mounting plate template recommended Blum item number: 177H3130ESold: Each