- Home
- Hafele Products
Hafele Products
Hafele 637.76.341 Screw Mounted Mounting Plate, for Häfele AXILO® 78 plinth system
$0.91
- For plinth height 53–220 mm (2 1/16"–8 21/32") - Material: Plastic - Color/finish: Black Order reference: - Please order tube with screw-in glide separately - Recommended screw head size: #6 x 1-1/2" flat head screw - protrudes approx. 5/8" - Hafele item no: 637.76.341 - Sold: each
Hafele 637.76.353 Adjustment Feet, 4", for Häfele AXILO® 78 plinth system
$1.34
- Plug fits into mounting plate - Height adjustment with AXILO™ adjusting tool - Installation: Plugs into mounting plate - Material: Plastic - Color/finish: Black - Load bearing capacity information: per foot (330 lbs) - Order reference: Please order mounting plate separately. - Supplied with: 1 Tube with adjusting foot (pre-mounted) - Installat...
Hafele 637.76.360 Adjusting Tool for Häfele AXILO® 78 plinth system
$143.85
- Height adjustment by rotating by hand or with electric tool to save time. - Product type: Adjusting Tool - Manufacturer: Häfele - Model series: AXILO® - Model: 78 - Area of application: for ergonomic and time-saving height adjustment of the AXILO® 78 plinth adjusting fitting system in the entire plinth area, as with corner cabinets, for exampl...
Hafele 637.38.054 Plinth Panel Clip, also suitable for Häfele AXILO® 78 plinth system
$0.66
- Material: Plastic - Color: White - Mounting: Screw mounted - NOTE: For use from installation height H = 3-1/8" (80mm) - Hafele item no: 637.38.054 - Sold: each
Hafele 637.76.344 Screw Mounted Round Mounting Plate, for Häfele AXILO®
$1.05
- Installation: Screw mounted - Area of application: Used for general applications when support tabs and plinth clips are not required. - Material: Plastic - Color/finish: Black - Order reference: Order adjustment feet separately. - Recommended screw head size: #6 x 1 1/2" flat head screw, protrudes approx. 5/8" - Hafele Item no: 637.76.344 - So...
Hafele 637.76.430 Light Adjusting Tool for Häfele AXILO® 78 plinth system
$38.10
- Height adjustment by rotating by hand or with electric tool to save time. - Product type: Adjusting Tool - Manufacturer: Häfele - Model series: AXILO® - Model: AXILO® 78 Light Tool - Area of application: for ergonomic and time-saving height adjustment of the AXILO® 78 plinth adjusting fitting system in the entire plinth area, as with corner ca...
Hafele Forstner Bit - 2-5/16" (58mm) Diameter - 001.07.522
$125.92
Diameter: 2-5/16" (58 mm) Item No.: 001.07.522
Hafele Ironfix™ Built-in Ironing Board - 568.60.710 - FREE DOMESTIC SHIPPING
$306.99
Hafele Ironfix™ Built-in Ironing Board • Space-saving, cabinet drawer installation; Integrated spring mechanism • Drawer front folds down to allow for pants, shirts, etc. • Support extends automatically as ironing board is pullout out • Continuous width adjustment for inside clear widths of 14-1/4" - 19-11/16" (362-500mm); Inside clear depth 19...
Kessebohmer LeMans II Set for Blind Corner Cabinets, Swings left, Maple/Chrome, 2 x 40 shape trays - 541.32.141
$464.00
> Includes soft close > Innovative mounting jig included; no measuring required > Height of door hinge must be considered > Shelves are height adjustable every 51 mm (2") > For full height door and door/drawer applications > Minimum door opening 85° > Internal cabinet height: min. 546 mm (21 1/2") > Weight capacity per sh...
Hafele 637.76.354 Adjustment Feet, 4-15/16" (125mm) , for Häfele AXILO® 78 plinth system
$1.65
- Plug fits into mounting plate- Height adjustment with AXILO™ adjusting tool- Installation: Plugs into mounting plate- Material: Plastic- Color/finish: Black- Load bearing capacity information: per foot (330 lbs)- Order reference: Please order mounting plate separately.- Supplied with: 1 Tube with adjusting foot (pre-mounted)- Installation Heig...
Kessebohmer LeMans II Set 541.32.140, for Blind Corner Cabinets With soft and self closing mechanisms, with non-slip effect, Swings right, chrome/maple, 2 x 40 shape trays
$471.23
Soft & Silent - Shelves height adjustable at intervals of (2") 50 mm via post and side profile - Please consider if a filler strip is needed based on your application. - For internal cabinet height: ≥546 mm - Load bearing capacity: 55 lbs - Internal cabinet height: Min. 21 1/2" - Height adjustment: Shelves are height adjustable every 2" - A...
Kessebohmer LeMans II Set for Blind Corner Cabinets, Swings left, Champagne/Maple, 2 x 60 shape trays - 541.32.461
$499.45
Hafele Item No.: 541.32.461 - Includes soft close - With 20% more storage capacity than the original Lemans - Innovative mounting jig included; no measuring required - Height of door hinge must be considered - Shelves are height adjustable every 2" - For full height door and door/drawer applications - Minimum door opening 85 degrees - Internal c...
Kessebohmer LeMans II Set for Blind Corner Cabinets, Swings right, Champagne/Maple, 2 x 60 shape trays - 541.32.460
$499.45
Hafele Item No.: 541.32.460 - Includes soft close - With 20% more storage capacity than the original Lemans - Innovative mounting jig included; no measuring required - Height of door hinge must be considered - Shelves are height adjustable every 2" - For full height door and door/drawer applications - Minimum door opening 85 degrees - Internal...
Hafele Under-sink Mat - Gray/Stainless 24-5/8" x 45-1/4" - 547.91.550
$82.45
Hafele Item No.: 547.91.550 • Cut-to-size to fit in sink cabinet • Unique dimples collect water or other liquids to prevent damage to cabinet • Dimples can collect up to 1 gallon of water per 6 square feet Width: 24-5/8" (625mm) Length: 45-1/4" (1150mm) Material: Polystyrene Color/Finish: Gray/Stainless (White shown in image)
Hafele Under-sink Mat - White 24-5/8" x 45-1/4" - 547.91.703
$82.45
Hafele Item No.: 547.91.703 • Cut-to-size to fit in sink cabinet • Unique dimples collect water or other liquids to prevent damage to cabinet • Dimples can collect up to 1 gallon of water per 6 square feet Width: 24-5/8" (625mm) Length: 45-1/4" (1150mm) Material: Polystyrene Color/Finish: White
Hafele Forstner Bit - 2-3/16" (55mm) Diameter - 001.07.513
$125.92
Diameter: 2-3/16" (55 mm) Item No.: 001.07.513
Hafele Ironfix™ Shelf-mounted Ironing Board - 568.60.781
$360.25
Hafele Ironfix™ Shelf-mounted Ironing Board • Fits into a 24" wide x 14" deep space • Rotates 180° degrees with seven pre-set positions • Due to the absence of ball bearing slides, clothing remains free from grease or pinch point damage • Mounts to a shelf with through bolts (included) Width: 20-1/2" (520mm) Depth: 13-3/4" (350mm) Height: 5-1/...
Rev-A-Shelf 5300/5700 Series Solid Bottom Pantry Pullout - Extender Bracket - 57-EXTENDER-1
$12.00
With the adjustable shelf extender bracket you can move the top shelf on our 5300 and 5700 Series pantries with ease. The slide-on design installs effortlessly when affixing to the fully extended frame letting you rearrange your shelves and maximize your storage space.
Hafele Under-sink Mat - Maple 24-5/8" x 45-1/4" - 547.91.705
$82.45
Hafele Item No.: 547.91.705 • Cut-to-size to fit in sink cabinet • Unique dimples collect water or other liquids to prevent damage to cabinet • Dimples can collect up to 1 gallon of water per 6 square feet Width: 24-5/8" (625mm) Length: 45-1/4" (1150mm) Material: Polystyrene Color/Finish: Maple
Hafele Holesaw Carbide Tip with Shank and Pilot Drill Bit - 4-1/8" (105mm) Diameter - 001.67.562
Hafele Holesaw Carbide Tip with Shank and Pilot Drill Bit - 4-1/8" (105mm) Diameter - 001.67.562
$106.32
Diameter: 4-1/8" (105 mm) Hole saw included (not in picture) Item No.: 001.67.562
Hafele Holesaw Carbide Tip with Shank and Pilot Drill Bit - 3-3/8" (86mm) Diameter - 001.67.561
Hafele Holesaw Carbide Tip with Shank and Pilot Drill Bit - 3-3/8" (86mm) Diameter - 001.67.561
$97.28
Diameter: 3-3/8" (86 mm) Hole saw included (not in picture) Item No.: 001.67.561
Hafele Holesaw Carbide Tip with Shank and Pilot Drill Bit - 3" (76mm) Diameter - 001.67.560
$89.20
Diameter: 3" (76 mm) Hole saw included (not in picture) Item No.: 001.67.560
Hafele Forstner Bit - 1-1/8" (28mm) Diameter - 001.08.012
$39.67
Diameter: 1-1/8" (28 mm) Item No.: 001.08.012
Hafele Forstner Bit - 2-11/16" (68mm) Diameter - 001.08.016
$122.32
Diameter: 2-11/16" (68 mm) Item No.: 001.08.016
Hafele Forstner Bit - 3-1/8" (80mm) Diameter - 001.08.050
$163.84
Diameter: 3-1/8" (80 mm) Item No.: 001.08.050
Hafele Forstner Bit - 9/16" (15mm) Diameter - 001.24.443
$55.11
Diameter: 9/16" (15 mm) Item No.: 001.24.443
Hafele Auger Bit - 1/2" (12mm) Diameter - 001.71.041
$36.98
Diameter: 1/2" (12 mm) Length: 16" (406 mm) Item No.: 001.71.041
Hafele Auger Bit - 3/8" (10mm) Diameter - 001.71.040
$34.14
Diameter: 3/8" (10 mm) Length: 16" (406 mm) Item No.: 001.71.040
Hafele Brad Point Drill Point 1/4" Hex Shank Bit - 3/8" (9mm) Diameter - 001.20.509
$17.28
Diameter: 3/8" (9 mm) Item No.: 001.20.509
Hafele Brad Point Drill Point 1/4" Hex Shank Bit - 1/2" (13mm) Diameter - 001.20.513
$35.58
Diameter: 1/2" (13 mm) Item No.: 001.20.513
Hafele Brad Point Drill Point 1/4" Hex Shank Bit - 1/2" (12mm) Diameter - 001.20.512
$25.58
Diameter: 1/2" (12 mm) Item No.: 001.20.512
Hafele Brad Point Drill Point 1/4" Hex Shank Bit - 9/16" (14mm) Diameter - 001.20.514
$38.10
Diameter: 9/16" (14 mm) Item No.: 001.20.514
Hafele Brad Point Drill Point 1/4" Hex Shank Bit - 5/16" (8mm) Diameter - 001.20.508
$14.21
Diameter: 5/16" (8 mm) Item No.: 001.20.508
Hafele Quick-Set Drilling Jig for Pulls - 001.35.001
$78.21
Quick-Set Drilling Jig for Pulls • For pulls on doors or drawer fronts • Ideal for small to medium size shops • With metric and inch scale • Use a 4.5mm or 3/16" drill Material: Plastic Color: Black Item No.: 001.35.001
Hafele Quick-Set Drilling Jig for Handles - 001.31.233
$53.41
Quick-Set Drilling Jig for Handles • For precise drilling and positioning of handles on door, flaps and drawer fronts • Convertible side stop, can be used horizontally and vertically • Drilling bushings: for drilling 11/64" - 3/16" (4.3 - 4.6mm) • Drill hole spacing: adjustable from 2-1/2" - 5-5/8" (64 - 143mm) • Distance from edge: adjustabl...